Apache Labs ANAN-200D User Manual

Apache Labs LLC
ANAN-200D Users Guide
This document contains the words Apache, ANAN-10, ANAN-10E,
ANAN-100, ANAN-100D and ANAN-200D
in reference to the Apache Labs Transceiver products
http://www.apache-labs.com
In cooperation with VK6PH, NRØV, W5WC, K5SO
and the OpenHPSDR Hardware and Software Projects
http://openhpsdr.org
all images and manufacturer data is copied here with permission of the owner
Copyright Apache Labs © June 22, 2015

Apache Labs ANAN-200D Specifications

General

Brand	Apache Labs
Model	ANAN-200D
Category	Transceiver
Language	English

Summary

Errata: List of changes to the document

Errata: List of changes to the document

Lists revisions and corrections made to the manual.

Apache Labs LLC, Inc. - Declarations of Conformity

Apache Labs Products CE and RTTE Certified

Important Operation tips

Heat Dissipation

Information on how the ANAN-200D manages heat.

Clarification CCS [30W]/ICAS [100W] operation

Power limits for different operating modes (CCS vs. ICAS).

Chapter 1 - Introduction

Minimum Requirements

Specifies the hardware and software prerequisites for the ANAN-200D.

ANAN Hardware Requirements

Lists the necessary hardware components for the ANAN-200D.

ANAN Front Panel Overview

Identifies and explains the controls on the ANAN-200D front panel.

Chapter 2 - Quick Start Instructions

Hardware Setup Steps

Guide to physically connecting and setting up the ANAN-200D.

Software Setup and Installation

Instructions for installing and configuring the necessary software.

ANAN-200D Antenna Connections

Chapter 3 – How to operate SSB Phone

Connecting a suitable Microphone

Guide to connecting microphones for SSB operation.

MIC Adapters

Information on adapters for different microphone types.

Adjusting mic gain

Steps for setting microphone sensitivity and levels.

Selecting Transmit Profile

How to choose and customize transmit audio profiles.

Chapter 4 – How to operate Digital modes

Clarification CCS [30W]/ICAS [100W] operation

Explains power limits for different operating modes (CCS vs. ICAS).

Chapter 5 – How to operate CW

Paddle Connection

How to connect CW paddles to the front panel.

Select Operating Frequency

Steps for selecting operating frequencies using the Panadapter.

Break-in Delay

Setting the delay for the CW T/R circuit.

Chapter 6 – How to Interface to your Linear Amplifier

PTT Input and Output

Connecting the ANAN-200D for linear amplifier keying.

ALC

Information on Automatic Level Control for linear amplifiers.

Chapter 7 – How to use PureSignal Adaptive predistortion

Warren Pratt NRØV PureSignal Information

Explanation of PureSignal technology for improving linearity.

Automatic Tx Attenuation adjustment

How to use the automatic Tx attenuation feature in PowerSDR.

Chapter 8 – How to install a new version of PowerSDR software

Instructions to load independent versions on a single PC

Guide to installing multiple PowerSDR versions on one computer.

Chapter 9 - How/when to install a new version of Apache Firmware

HPSDRBootloader

Information on the utility for updating ANAN firmware.

Pointers to reference materials

Apache Labs International Support

Contact information for technical support from Apache Labs.

Apache Service and Repair

Details for obtaining service and repairs for the ANAN-200D.

Manual Calibration Procedure

Computer Performance Considerations

Warranty Information

IMPORTANT (ESD Precautions)

Safety instructions for handling PCBs to prevent ESD damage.

OpenHPSDR Software Ecosystem

The CORDIC Algorithm

ANAN-200D Accessory Port [back panel]

ACC/IO Port Pinout Description

Detailed mapping of pins on the ANAN-200D accessory port.

APIPA Automatic Private IP Addressing

Apache Hardware Details

ANAN-10/100 [Hermes] PCB

Visual overview of the ANAN-10/100 main circuit board.

ANAN-100 jumper locations

Identifies key jumper positions on the ANAN-100 board.

ANAN-200D PA and Filters

Block diagram of the ANAN-200D power amplifier and filter stages.

NOTES