Apache Labs ANAN-10 - User Manual

Apache Labs ANAN-10 Users Guide
DDC/DUC HF +6M Transceiver
ANAN-10 DDC/DUC Transceiver
Apache Labs – http://www.apache-labs.com
In cooperation with VK6APH and the Open Source Hardware and Software Project
http://openhpsdr.org
N9VV and KC9XG 1 of 42 v0.63 January 8, 2013

Apache Labs ANAN-10 Specifications

General

Brand	Apache Labs
Model	ANAN-10
Category	Transceiver
Language	English

Summary

Ethernet Connection

Suitable routers or LAN Network switches

Quick Start Instructions

Hardware Setup

Connects the ANAN-10 to power, antenna, and network.

Software Setup

Initial Power On

CW Key Selection and Wiring

Manual PA Calibration

Setup PA settings form

Step-by-step procedure for calibrating PA settings.

Microphone Settings

Adjusting mic gain

Guide to adjusting microphone input gain for clear voice transmission.

Transmit Parameters

Tune

Setting transmit power output levels and modes for different bands.

VOX

Transmit Filter

Tuning the PowerSDR Receiver

Preliminary receiver setup

Initial settings for the receiver gain and attenuation.

Changing frequency

Microphone Interfacing

Attaching a PC microphone

Steps to connect standard PC microphones to the ANAN-10.

Adapting typical (NON-USB) PC microphone

Guide for connecting common PC microphones using adapters.

Adding a Hand or foot operated Push-To-Talk switch

Modular Microphone connections

Guide for connecting common modular microphones using adapters.

Example adaptation (Yaesu MH-31 A8 J)