Apache Labs ANAN-100/D User Manual

Apache Labs ANAN-100/D
ANAN-100/D DDC/DUC Transceiver
This document uses the words Apache ANAN-10, ANAN-100 and ANAN-100/D
in reference to the Apache Labs Transceiver products
Apache Labs – http://www.apache-labs.com
In cooperation with VK6APH and the Open Source Hardware and Software Project
http://openhpsdr.org
all images and manufacturer data is copied here with permission of the owner
Revision v1.8 April 23, 2013 1 of 70 authors N9VV and KC9XG

Apache Labs ANAN-100/D Specifications

General

Type	SDR Transceiver
Modes	SSB, CW, FM, AM, Digital
Power Output	100W
Audio Output	Yes
Connectivity	Ethernet, USB
Software	Thetis

Summary

Important Operation Tips

Minimum Requirements

Computer Basic Requirements

Specifies the minimum computer hardware needed for optimal SDR operation.

Ethernet Connection Setup

ANAN-100/D Hardware Requirements

Recommended Software Requirements

ANAN-100/D Front Panel

ANAN-100/D Back Panel

Quick Start Instructions

Hardware Setup

Step-by-step guide for physically connecting and setting up the transceiver.

Software Setup

Windows Software Installation

Detailed instructions for installing P*SDR software on Windows operating systems.

CW Key Selection and Wiring

Selecting Iambic Paddles or Straight Key

Guide on configuring CW key types and wiring within the P*SDR software.

Antenna Use and Switching

HPF/LPF Filters and Switching

Manual PA Calibration

Microphone Settings

Adjusting Microphone Gain

Transmit Configuration

Tuning the P*SDR Receiver

Attaching a PC Microphone

PTT Switch Integration

ANAN-100/D Rear Panel Connections

Troubleshooting Section

Resetting Database.xml

Steps to resolve issues caused by a corrupted database.xml file.

Resolving Issues After Database Reset

Further steps if resetting the database.xml file does not fix the problem.

Upgrading P*SDR Software

Receiver Deafness Troubleshooting

Diagnosing and fixing issues related to poor receiver sensitivity.

No Transmit Audio Troubleshooting

Steps to resolve issues where no audio is transmitted.

Power Output Troubleshooting

Steps to diagnose and fix problems related to transmit power output.

Appendix H: HPSDRProgrammer Tool

Installing HPSDRProgrammer V2

Using HPSDRProgrammer

Upgrading Firmware with HPSDRProgrammer

Assigning IP Address with HPSDRProgrammer