APART Champ-One - General Technical Specifications; Physical Specifications

INFO@APART-AUDIO.COM
15
Input impedance / sensitivity unbalanced
(RCA)/4ohm
10 Kohm / 1 V 0dBV
Inputimpedance/sensitivitybalanced(XLR)
/ 4 ohm
20 Kohm / 1 V 0 dBV
Frequencyresponse(0,-0.5dB) 10Hz–50kHz
THD < 0.05 %
IMD <0.08%
Noise >100 DBA
Gain 33dB(39dBbridged)
Damping factor “Solid” >100 at binding posts
Dampingfactor“Tube” >10 at binding posts
Dynamics and level control APC, programmable
Power amp circuit design Highcurrent,highvoltageclassG-H
Efciency(dynamicprogramof10dB,1V
input)
>70 %
Protection circuits DC,HF, clip,overcurrent,short-circuit
Temperatureprotection 2step/channel+transformer105°C
Cooling convectional, no fan
Power consumption 18VAidle,1KVAfullprogram,1.5KVApeak
Mains power requirements 230VAC, 50Hz
General technical specications
Physical specications
Netdimensions(cm)(WxHxD) 48.3X8.8X38
Grossdimensions(cm)(WxHxD) 58.5x15.5x56.5
Netweight 13 kg
Gross weight 19 kg