11
11. Microphone 3 input on XLR: balanced microphone level input
with optional phantom power supply. This input is internally
hardwired to the MIC 3 TRS jack input (12) and to line input 3
(10). Use only one of these inputs at the time. Do not connect
an unbalanced signal to the XLR connector when phantom
power is present, this will result in a short circuit of the
phantom power supply.
12. Microphone 3 input on 6.3 mm TRS jack: balanced microphone
level input with optional phantom power supply. This input
is internally hardwired to the MIC 3 XLR jack input (11) and
to line input 3 (10). Use only one of these inputs at the time.
Do not connect an unbalanced signal to the 6.3 mm TRS jack
connector when phantom power is present, this will result in a
short circuit of the phantom power supply.
13. Microphone 2 input on XLR: balanced microphone level input
with optional phantom power supply. This input is internally
hardwired to the MIC 2 TRS jack input (14). Use only one of
these inputs at the time. Do not connect an unbalanced signal
to the XLR connector when phantom power is present, this will
result in a short circuit of the phantom power supply.
14. Microphone 2 input on 6.3 mm TRS jack: balanced microphone
level input with optional phantom power supply. This input is
internally hardwired to the MIC 2 XLR jack input (13). Use only
one of these inputs at the time. Do not connect an unbalanced
signal to the 6.3 mm TRS jack connector when phantom power
is present, this will result in a short circuit of the phantom
power supply.
15. Microphone 1 input on XLR: balanced microphone level input
with optional phantom power supply. This input is internally
hardwired to the MIC 1 DIN5 jack input (16) and the MIC 1
connector on the front panel of the unit. Use only one of these
To Next Page
Loading...
