7
Features
• 19”, 2 rack units high.
• 8 output channels powered with class-D amplifiers.
• 8 x 250 watts (4 ohms) or 4 x 500 watts (8 ohms) RMS.
• Switching mode power supply.
• Intelligent thermal power limiting circuit: limits the output
power to a safe limit whenever a thermal overload occurs.
• Very high channel separation.
• Input signal clip indicators on the rear for fast and easy
configuration of the input gain.
• Versatile LED status indicators on the front.
• Unbalanced RCA input and Balanced euroblock input for each
input.
• Input level attenuators on all inputs.
• Switchable high pass filter on each input (250 Hz).
• Extended speaker and amp protection circuits: over current
protect, over temperature protect and DC protect.
• Cooling fan.
• Integrated APC limiter.
• Removable rack-ears.
Note: the integrated APC limiter will automatically limit the
incoming audio signal to avoid overloads. This feature cannot be
defeated and acts as a lifesaver for your valuable speakers.
To Next Page
Loading...
