Apec Water CS-2500 - Step 4: System Start-Up; Turning on Feed Water and Checking for Leaks; Flushing the New System

5
Turn on feed water:
Slowly, turn on your
Cold water supply. Turn
counter-clockwise to
allow the raw water to
enter the system.
Check for leaks!
Turn on the cold water
faucet and let it flush the
new system for up to 5
minutes.
8
9
10
Congratulations! You have successfully installed the APEC Water Filtration System!
* * * End Installation Section * * *
Step 4: System Start-Up