Apec Water Instant Hot User Manual

4
OFF
INSTALLING THE INSTANT HOT WATER SYSTEM WITH APEC
HOT & COLD FAUCET
Step 1:
Be sure the dial on the instant hot system is in OFF
position during installation.
1
2
3/8”
A.
* Hot & Cold Fauce already installed into counter.
2
3/8”
B.
Step 2 A:
Install nut on the hot water tubing connector.
Step 2 B:
Hold bottom nut using one wrench and screw #2
by hand first then securely tighten with 2nd wrench.
Step 2 C:
Slide hot water tube locking clip upwards into the
5/16” clear tubing and connect tubing to hot water
tubing connector.
2
3/8”
C.
#2
#2
#2
5/16”
White
or
Clear
Tubing

Apec Water Instant Hot Specifications

General

Brand	Apec Water
Model	Instant Hot
Category	Water System
Language	English