8
CLEANING AND MAINTENANCE
Seasonal Shutdown
To prevent damage when dispenser is exposed to freezing temperatures, water must be drained.
1. Unplug dispenser tank to power supply.
2. Turn thermostat control dial to OFF position (fully counterclockwise).
3. Turn faucet on and run water until water is cold.
4. Place a 3-quart (2.8 L) container under frain plug at bottom of the tank. Use a screwdriver to remove the
screw and O-ring in the drain tube opening. When tank is fully drained replace O-ring and screw. Tighten to
reseal the drain.
To Next Page
Loading...
Need help?
General
