Need help?Do you have a question about the Apec Water ROCT-PLUS and is the answer not in the manual?
General| Type | Reverse Osmosis Water Dispenser |
|---|---|
| Filtration Stages | 5 |
| Water Production Rate | 75 GPD |
| Tank Capacity | 3.2 gallons |
| Power Supply | 110V/60Hz |
| Feed Water Pressure | 40-85 PSI |
| Feed Water Temperature | 40-100 °F |
| Voltage | 110V |
| Operating Pressure | 40-85 PSI |
| Temperature Range | 40-100°F |
| Included Filters | Carbon filter, RO membrane |
| Warranty | 1 year |
Explains the functions and buttons on the dispenser's control interface.
Describes the indicators and information shown on the dispenser's display.
Explains how to dispense water, including continuous and volume-specific dispensing.
Details how to choose between room temperature, preset, and custom hot water temperatures.
Outlines regular cleaning procedures for the water tank, floating ball, and filter mesh.
Lists error codes, their causes, and recommended solutions for troubleshooting.
To Next Page