1
The user must operate strictly in accordance with the installation guidelines described in this “Product
Installation and Operating Manual” (hereinafter referred to as the manual).
• Before use, please confirm that the applicable voltage of the dispenser is consistent with the actual
voltage used by users.
• This dispenser is designed for home use. Please contact APEC Water for use in other applications.
• Do not use this system under the following situations:
a.) When you find the dispenser is damaged
b.) When you find the power cord or plug is damaged
c.) When you find the water in the dispenser keeps overflowing
• You should immediately contact APEC customer support team for proper maintenance.
• To properly maintain your APEC drinking water system, please use only genuine APEC Water replace-
ment filters and parts. Any system performance issues, problems, property damage or loss caused by
the use of unauthorized filters, parts, or accessories are not covered by warranty.
• Do not disassemble or modify the dispenser without manufacturer approval, which may result in wa-
ter leaks or property damage.
• Any malfunction caused by improper use or system modifications will not be covered by the warranty.
• The dispenser should be placed horizontally on a flat, clean and heat-resistant surface. It should be
placed in a ventilated, sun-proof, freeze-proof room and away from any heat sources. Avoid contact
with corrosive substances.
• The feed water should be from your city tap water or microbiologically safe and adequately disinfected
water.
• Do not add ice cubes and other mixed liquids, such as milk and fruit juice, into the water tank.
• The required tap water temperature is 41°F-100°F. This is necessary to prevent damage to the dispens-
er.
• Regularly check and inspect whether the power supply and electrical wires are loose or damaged.
Avoid damages caused by faulty wires.
• Only qualified professional personnel should attempt to repair or replace the power wire when it is
damaged. Non-professionals may be at the risk of electric shock during maintenance.
• Do not insert or pull the power plug with wet hands or clean the plug with a damp cloth to avoid the
risk of electric shocks.
WARNING
THINGS YOU MUST KNOW
01
SAFETY PRECAUTIONS
02
To Next Page
Loading...