APEC PERMEATE-PUMPED R.O. SYSTEM User Manual

APEC PERMEATE-PUMPED R.O. SYSTEM: Installation
Addendum
How to install your RO-PERM system:
The steps for installing your Permeate Pumped RO system are the same as for installing the
non-pumped systems.
Please follow instructions in the Installation Manual from Pages 1 – 11.
When you get to Step 6: “Connecting the System” in the Manual, use this Addendum
for Steps 6. (Skip Manual pages 12-16).
Step 6: Connecting The System
Fitting Types: There are 3 types of fitting provided for connecting the system
1. Metal compression nut fitting
(comes with 1 insert, 1 sleeve, 1 nut)
Fig. 11
Important! Use plastic sleeve on the plastic tubing we provide.
Do Not use metal sleeve on plastic tubing or the connection
will leak!
1
free drinking water.com

APEC PERMEATE-PUMPED R.O. SYSTEM Specifications

General

Type	Reverse Osmosis
Stages	5
Filter Life (pre-filters)	6-12 months
Filter Life (RO membrane)	2-3 years
Storage Tank Capacity	4 gallons
Waste Water Ratio	3:1
Operating Pressure	40-85 psi
Operating Temperature	40-100°F
System Type	Under-sink
Pump	Permeate Pump (non-electric)
Included Components	RO system, storage tank, faucet
Weight	25 pounds