Need help?Do you have a question about the APEC RO-PERM and is the answer not in the manual?
General| Brand | APEC |
|---|---|
| Model | RO-PERM |
| Category | Water Filtration Systems |
| Language | English |
Review system components, tools needed, and operating parameters before starting installation.
Assemble the sediment, carbon filters, and housings onto the main RO system unit.
Connect the system to the cold water supply and install the drain saddle for waste water.
Mount the RO faucet and connect all system tubing for water flow.
Steps to start the system, fill the tank, and check for leaks after installation.
Guide on filter replacement intervals and step-by-step instructions for pre-filters, membrane, and carbon filter.
Guidance on maintaining and replacing filter housings and O-rings.
Explanation of basic terms (GPD, TDS) and a visual flow diagram of the RO system.
Importance of water pressure and how to test water quality using a TDS meter.
Details on tank fill, delivery pressure, and troubleshooting low water pressure.
Identifies common reasons for premature failure of the RO membrane.
Diagram and identification of the RO head's key points and components for troubleshooting.
Solutions for humming noises, no water, slow flow, and sluggish output at the faucet.
Addresses tank filling, shut-off, TDS, leaks, water taste, and air bubbles.
Instructions on how to install the AirGap faucet and connect its tubing.
Details the warranty period, coverage, and conditions for validity.
Lists defects not covered and conditions that render the product warranty void.
Information on how to contact APEC for warranty claims or service inquiries.
To Next Page
