APEC ROTL-600 User Manual

APEC ROTL-600 System Filter Change Instruction
Note: This filter should not be used with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system. Please replace the filter cartridges regularly according to the filter cartridge life
indicator or reminder information.
Filter cartridge replacement steps
1. Turn on the drinking faucet and turn off the supply water to the system. When pure water stops from the drinking
faucet, unplug the power adapter.
2. Unscrew the existing filter cartridge counterclockwise and relieve the pressure.
Unscrew the filter cartridge
1
Remove horizontally
2
3. Remove the plastic protection cover at the upper end of the filter cartridge.
Filter cartridge

APEC ROTL-600 Specifications

General

Filtration Stages	6
Tank Material	Steel
Filtration Technology	Reverse Osmosis
Operating Pressure	40-85 PSI
Warranty	1 Year Limited Warranty
Product Type	Reverse Osmosis System
Filter Lifespan	6-12 months (pre-filters), 2-3 years (membrane)
Filter Life	6-12 months (pre-filters), 2-3 years (membrane)
Operating Temperature	40-100°F

Summary

Filter Cartridge Replacement

Filter Cartridge Replacement Steps

Detailed steps for removing the old filter cartridge and installing a new one, including turning off water and unplugging power.

Filter Cartridge Installation

Instructions for inserting and securing the new filter cartridge into the system housing, ensuring correct alignment and tightening.

Filter Cartridge Reset and Flush

Resetting the Filter Cartridge

Procedure to reset the filter cartridge indicator after replacement, enabling the system to monitor filter life.

Filter Cartridge Flush Procedures

Specific flushing durations and methods for different filter types after replacement and reset.

Important Cautions for Filter Replacement

Key warnings regarding using genuine parts, actual filter life depending on water quality, and replacement timing.