① Insert the desiccant
◎Place the cat feeder in a horizontal position
◎Press the button on the top of the product to open the cover
and insert the desiccant into the desiccant box.
③ Connect the power supply
◎Open the battery compartment at the bottom of the device
and install 3 AA alkaline batteries (not required) . Even if the
power is cut off at home, the feeding schedule will not be
affected, and it can last for about 45 days.
◎Insert the power adapter into the wall socket and connect it
to the device.
◎The display will automatically light up, indicating that the feeder is on.
② Fill the food
◎Fill the food bin with dry food. Cover the lid and press the
latch to secure it.
Note:
1.Do not use canned, wet, or moist pet food.
2.The recommended size range of pet food is 3-13mm.
④ Assemble the food tray
◎Align the protruding part of the food tray with the hole on the
base, and push up to connect.
◎Install the stainless steel tray.
Note:
1.Before turning on the power, please make sure all components are
clean and completely dry.
2.In the event of a power outage or other circumstances that result
in a loss of power, the feeder will automatically switch to battery power
if there is power in the backup batteries to maintain normal operation.
04
How to assemble?
To Next Page
Loading...