11
60 min : 15, 30 and 60 min symbols light on.
Continuous : 15 and 30 min symbols light on, and the 60 min symbol flashes.
To reset timer, turn both channels o. When you are ready to begin another treatment cycle (at least
rest for 7 seconds), turn the unit on as normal. The timer will be reset to its current setting.
WIDTH ▲▼
The pulse Width key regulates the pulse width for both channels.
RATE ▲▼
The pulse Rate key regulates the number of pulse per second for both channels.
SET/ENT
The SET/ENT keys are used to select the type of treatment utilized. The type of treatment utilized
includes cycle On time, On Ramp time and cycle O time. The selected parameter will ash during
adjust.
▲▼
The ▲▼ keys regulate the number of On, Ramp and O value.
After completed new values setting, press ENT key to update the new value.
To Next Page
Loading...
