To Next PageTo Next PageWhat to do if the alarm is on (visual) on Apex Digital DOMUS 3 Medical Equipment?
If the visual alarm is activated on your Apex Digital Medical Equipment, several factors could be the cause. First, verify if the power has been suddenly shut down. Next, ensure the CPR is properly sealed. Check that the air tube connector is tightly secured to the pump unit. Finally, confirm that all tubing connections along the mattress are securely fastened.
How to troubleshoot power not being on for Apex Digital Medical Equipment?
If the Apex Digital Medical Equipment is not turning on, make sure the plug is properly connected to the mains.
What to do if the patient is bottoming out on Apex Digital DOMUS 3?
If the patient is bottoming out on the Apex Digital Medical Equipment, the pressure setting may be inadequate. Adjust the comfort range 1 to 2 levels higher and wait a few minutes to achieve optimal comfort.
Why is the mattress form loose on my Apex Digital DOMUS 3?
If the mattress form feels loose on your Apex Digital Medical Equipment, check that all snap buttons or straps of the mattress are securely fastened. Also, verify the mattress is fixed to the bed frame using straps.
Why is there no air produced from some air outlets of the air tube connector in Apex Digital DOMUS 3?
If no air is being produced from some air outlets of the air tube connector on the Apex Digital Medical Equipment, this is normal. The air outlets take turns producing air during their cycle time in alternating mode.
General| Brand | Apex Digital |
|---|---|
| Model | DOMUS 3 |
| Category | Medical Equipment |
| Language | English |
Instructions to reduce the risk of electrical shock from the product.
Instructions to reduce risks of burns, shock, fire, or injury.
Notes and warnings for safe operation and maintenance.
Overview of the pump and mattress components.
Detailed description of the pump unit, including front and rear views.
Step-by-step guide for installing the pump and mattress.
Explanation of the control panel functions and indicators.
Description of the green LED indicator for normal pressure.
Description of the yellow LED indicator for low pressure.
Explanation of Alternate/Static pressure modes.
Procedure for rapid deflation during CPR emergencies.
General maintenance checks for the pump and mattress.
Procedures for cleaning the pump and mattress units.
Solutions for common issues like power, alarms, and mattress form.
Detailed technical specifications of the pump and mattress.
Manufacturer's declarations on electromagnetic emissions and immunity.
