What to do if the alarm is on for my Apex Digital DOMUS 4 Medical Equipment?
If the Apex Digital Medical Equipment alarm is on, it could be due to several reasons. First, check if the power has suddenly shut down. Secondly, ensure the CPR is properly sealed. Also, verify that the connection between the air tube connector and the pump unit is tightly secured. Finally, confirm that all tubing connections along the mattress are properly secured.
Why is the patient bottoming out on the Apex Digital DOMUS 4?
If the patient is bottoming out on the Apex Digital Medical Equipment, the pressure setting might be inadequate. Adjust the comfort range 1 to 2 levels higher and wait a few minutes to achieve optimal comfort.
What to do if the mattress form is loose on my Apex Digital Medical Equipment?
If the mattress form is loose on your Apex Digital Medical Equipment, check that all the snap buttons or straps of the mattress are securely fastened. Also, make sure the mattress is fixed to the bed frame using straps.
Why is there no air produced from some air outlets of the air tube connector in my Apex Digital Medical Equipment?
If no air is produced from some air outlets of the air tube connector on the Apex Digital Medical Equipment, this is normal because the equipment operates in alternating mode.
Instructions to reduce the risk of electrical shock from the product.
Warnings to reduce risks of burns, electrical shock, fire, or personal injury.
Details the product's purpose for pressure ulcer prevention and patient comfort.
Explains pressure control, Max Firm, Alternate, Static, and Seat Inflate modes.
Covers pump activation, inflation, CPR deflation, and general usage steps.
Addresses power issues, alarms, patient bottoming out, loose mattress, and air output problems.
General| Brand | Apex Digital |
|---|---|
| Model | DOMUS 4 |
| Category | Medical Equipment |
| Language | English |
To Next Page