How to fix no display on Apex Digital Medical Equipment?
If your Apex Digital Medical Equipment isn't displaying anything, first ensure the power cord is properly connected to the power socket. If the problem persists, it could be due to LCD or controlled PCB failure, in which case you should contact your equipment provider for repair.
Why is the humidifier power indicator not lit on my Apex Digital Medical Equipment?
If the integrated humidifier power on indicator is not lit on your Apex Digital Medical Equipment, first, ensure the power cord is plugged into a working AC outlet. If it still doesn't light up, check if the power switch is turned on. If the issue persists, it may be due to a worn-out PCB or indicator, or a blown fuse, requiring you to contact your local agent or EU representative for service.
What to do if there is no air flow through the mask of Apex Digital iCH Auto Medical Equipment?
If there is no air flow through the mask of your Apex Digital Medical Equipment, check that the power cord is correctly connected. Also, ensure the flexible tubing is properly connected and not blocked. Unblock the flexible tube if needed.
Why is the air delivered so slow on my Apex Digital Medical Equipment?
If the air delivered by your Apex Digital Medical Equipment is slow, first check the ramp time setting. Also, make sure to regularly change or clean the filter if it's too dirty.
How to stop water leakage from Apex Digital Medical Equipment?
If you are experiencing water leakage with your Apex Digital Medical Equipment, it may be because the water chamber is not properly assembled. Remove the water chamber from the heated humidifier, pour out the water, and reassemble it, ensuring it closes securely. Refill the water to the fill line and check for leaks again. If the water chamber is worn out, replace it with a new one.
What to do if Apex Digital iCH Auto display code is incorrect?
If your Apex Digital Medical Equipment displays an incorrect code, it could indicate LCD or controlled PCB failure. Contact your equipment provider for repair.
Why can't data be copied to the SD card in Apex Digital Medical Equipment?
If your Apex Digital Medical Equipment is not copying data to the SD card, ensure the SD card has enough capacity and is inserted correctly into the slot. If the issue persists, try formatting the card.
What to do if buttons do not work on Apex Digital iCH Auto Medical Equipment?
If the buttons on your Apex Digital Medical Equipment do not work, it could be due to button failure. Contact your equipment provider for repair.
Why is the illuminator under the LCD not on in my Apex Digital iCH Auto?
If the illuminator under the LCD is not on for your Apex Digital Medical Equipment, it could be due to LED failure. Contact your equipment provider for repair.
General| Brand | Apex Digital |
|---|---|
| Model | iCH Auto |
| Category | Medical Equipment |
| Language | English |
Critical safety advisories for device operation and usage scenarios.
Precautions for safe operation, environment, and interference.
Instructions to reduce risks of electrocution from the device.
Instructions to reduce risks of burns, electrocution, fire, and personal injury.
Overview of Obstructive Sleep Apnea (OSA) and CPAP treatment.
Describes the device's purpose for treating Obstructive Sleep Apnea (OSA).
Lists pre-existing conditions that may contraindicate CPAP therapy.
Lists components included in the CPAP device package.
Identifies and labels the main parts of the CPAP device and humidifier.
Step-by-step guide to remove and disassemble the water chamber.
Instructions on how to fill the water chamber with distilled water.
Guide to connecting tubing, mask, and power for initial device operation.
Explains the buttons and their functions on the CPAP device control panel.
Details on how to use the device, including first-time setup.
Explanation of settings accessible via the menu button, like pressure and ramp time.
Description of initial pressure, PVA, low pressure shut off, compliance, alarms, and clock settings.
Procedure for safely powering down the CPAP system.
How to read and interpret compliance data like usage hours and AHI.
Information on checking device values as requested by a care provider.
Instructions for operating and adjusting the heated humidifier settings.
Guide for copying and transferring usage data using the SD card.
Procedures for cleaning the main CPAP device and its parts.
Instructions for cleaning and maintaining the air tubing and mask system.
Guide for cleaning and replacing the device's air filter.
Steps for cleaning and maintaining the water chamber.
Lists common issues, their possible causes, and recommended solutions.
Explains error and warning codes displayed on the device's LCD screen.
Details power, pressure, dimensions, weight, and operating environment.
Defines the meaning of NOTE, CAUTION, and WARNING symbols used in the manual.
Guidance on device inspection and servicing by authorized technicians.
Details warranty periods for CPAP devices, water chambers, and masks.
Manufacturer's declaration on electromagnetic emissions and their compliance.
Details immunity test levels for electromagnetic fields and compliance environments.
Specifies field strength limits and separation distances for RF equipment.
Recommended minimum distances between the device and RF communication equipment.
To Next Page