Apex Digital MACH 1 - Installation; How to Use

www.ApexCharger.com
Quick User Guide
MACH 1
MACH 1
Installation
How to use it
Drill & install
the mounting
plate on the
wall with the
4 screws.
Place the
MACH 1
main unit
body on the
mounting
plate.
Install the anti-
theft screw,
one on MACH
1’s main unit.
1 2 3
1. Ensure the
charger is
connected
to a power line.
2. Connect the EV
to the charger.
3. Swipe the RFID
card or start the charge
through the APP.
4. EV is charging. 5. Swipe the RFID
card or stop the
charge through the
APP or the vehicle.
6. Unplug the vehicle
and wrap the cable on
the remote holster.