Apex Digital MACH 1 - Troubleshooting

www.ApexCharger.com
Quick User Guide
MACH 1
MACH 1
Troubleshooting
Issue
Reason
Troubleshooting
Excessive
Leakage
Current
Excessive
Leakage
Current
1. Switch off the distribution box
immediately.
2. Check if the AC charger output
line is damaged, has a low
impedance to the ground or a short
circuit.
3. Check if the vehicle’s inlet socket
is in good condition.
4. After performing the actions
above, power-on the unit. If issue
persists, please contact us.
AC
Overcurrent
High Input
Current
1. Switch off the distribution box
immediately.
2. Check whether there is low
impedance or a short circuit between
the output lines of your MACH 1
charger.
3. After troubleshooting the options
above, power it on again. If the issue
persists, please contact us.