Apex Digital MACH 1 - Page 9

www.ApexCharger.com
Quick User Guide
MACH 1
MACH 1
Issue
Reason
Troubleshooting
Grounding
Fault
Grounding
failure
1. Switch off the distribution box
immediately.
2. Check whether the input/output line
of the AV charger is grounded
properly or not.
3. After troubleshooting the above
options, turn on the power on the unit.
If the issue persists, please contact
us.
AC
Undervoltage
Low Input
Voltage
1. If the voltage is lower than 190V
AC for a short time, the charger will
stand by and monitor the power
network restoring itself when voltage
is back to the normal voltage range.
2. If the voltage is under 190V AC for
a long time, wait to use the charger
after the voltage is back to normal
range.
Relay Failure
Relay
Failure or
Adhesion
1. Restart the charger, let the charger
repair itself.
2. If the issue persists, contact our
support team.
CP Error
Charger
Connection
Error
1. Check if the connection of the
charging plug with the vehicle’s inlet
socket is tight and reliable.
2. If the issue persists, contact
support.