Apex Digital Mini-Plus - Product Specifications

11
English
8. Specifications
Electrical Rating
(Note: Refers to the rating
label on the product)
 230VAC,60Hz,0.6A
(for 230V system)
 230VAC,50Hz,0.6A
(for 230V system)
Maximum Compressor
Pressure
≧ 35 psi ≧ 35 psi
Operating Flow Rate
≧ 6.0 lpm ≧ 5.5 lpm
Nebulization Rate 0.2 - 0.3 ml/min
Particle size 0.5 ~ 5 microns*
Classification Class II. BF equipment. IP2X. No AP/APG protection.
Applied part Mouthpiece or Mask
Dimensions (W x D x H)
14.0 × 18.8 × 10.0 cm /
5.5” × 7.4” × 3.9”
Weight 1.6 kg / 3.5 lb
Fuse (see note 3)
T1.6AL 250VAC for 230V system
Operation: 10 ℃ to 40 ℃ / 50 ℉ to 104 ℉
Storage: -15 ℃ to 50 ℃ / 5 ℉ to 122 ℉ Temperature
Transport: -15 ℃ to 70 ℃ / 5 ℉ to 158 ℉
Operation: 10% to 90%RH non-condensing
Storage: 10% to 90%RH non-condensing
Humidity
Transport: 10% to 90% RH non-condensing
Environment
Atmospheric
pressure
Operation: 700-1013.25 hPa
Note: 1. *Values are determined by supplier’s nebulizer.
2. Consult distributor(s) or EU representative(s) for additional technical documents.
3. The Nebulizer is fitted with a fuse as specified in the Specifications chart, which is designed to be
maintained by the manufacturer or its agents. Users are not allowed to open the cover to replace a
blown fuse.
9. Expected Service Life
The products are intended to offer safe and reliable operation when use or installed according to the
instructions provided by Apex Medical. Apex Medical recommends that the system be inspected and
serviced by authorized technicians if there are any signs of wear or concerns with device function
and indication on products. Otherwise, service and inspection of the devices generally should not be
required.