9
MQ-210 sensor attach to AL-100 leveling
plate.
AM-320 Saltwater Submersible
Sensor Wand
DEPLOYMENT AND INSTALLATION
Apogee MQ series quantum meters are designed for spot-check measurements, and calculation of daily light integral (DLI;
total number of photons incident on a planar surface over the course of a day) through the built-in logging feature. To
accurately measure PFFD incident on a horizontal surface, the sensor must be level. The AL-100 accessory leveling plate is
recommended for use with the MQ-210 to ensure the sensor is level when attached to a cross-arm. The bubble-level in the
plate makes leveling simple and accurate.
The AM-320 Saltwater Submersible Sensor Wand accessory incorporates a mounting fixture at the end of a 40 inch
segmented fiberglass wand and is well-suited for saltwater use. The wand allows the user to place the sensor in hard reach
areas such as aquariums.
To Next Page
Loading...
Need help?
General
