Do you have a question about the Apollo 1550ETL and is the answer not in the manual?
Brand | Apollo |
---|---|
Model | 1550ETL |
Category | Gate Opener |
Language | English |
Warning against welding parts to gate or posts when operator circuit board is powered.
Details on locating the pivot point and setting the vertical position for the pivot arm.
Instructions for physically mounting the gate operator actuator.
Guidance on mounting the control box and positioning its components.
Wiring instructions for connecting the actuator cables to the control board.
Procedure for attaching the gate bracket to the gate and actuator.
How to adjust the actuator's limit switches for opening and closing.
Information on 816E/816EX actuators, compatibility with 416 actuators, and cable considerations.
Setting up the pivot arm for the push-to-open configuration.
Instructions for reconfiguring actuator wiring for the push-to-open mode.
Guide to programming the control board for safe operation and sensitivity settings.
Identification of key components and connectors on the 835/836 control board.
Defines the function of each pin in the actuator connector and its wiring.
Instructions for emergency bypass and connecting remote outputs/photo eye.
Details on adjusting timer, delay, and sensitivity settings for gate operation.
Explanation of the Stop Circuit Jumper and its impact on operation.
Explanation of the function for each program switch.
Wiring and function of optional device inputs.
Siren wiring and program switch settings.
Receiver setup and compatibility notes.
Solutions for a gate that opens correctly but reverses during closing.
Troubleshooting steps for a gate that stops or reverses shortly after starting.
Addressing issues where the gate movement is jerky or inconsistent.
Diagnosing why the gate responds to push buttons but not transmitters.
Solutions for poor transmitter range or reception problems.
Resolving issues where the gate opens, closes, or stops unexpectedly.
Steps to resolve issues when the gate fails to operate at all.