Apollo 7100 - Chain Magnets Installation

CHAIN MAGNETS INSTALLATION
Align each magnet with the
corresponding switch on the
operator.
Connect the battery and adjust
the magnets for proper open &
close limits.
WARNING : Always disconnect
battery prior to relocating the
magnet.
Chain Path
Switch
Magnet
Switch
Magnet
Operator
Top View - Right Side
Front View
Switch
Magnet
Switch
Magnet
10
1.
2.
TIP:
If the gate automatically
opens after the close timer
expires, reverse the red &
black motor wires and reverse
the orange & white limit wires.