11 AIM-1SL & AIM-2SL Hardware Manual
© 2011 Apollo Security Inc.
2.7 Additional Installation Information
2.7.1 Mounting Holes
Four holes are provided for mounting the AIM-1/2SL. Standoffs should be used when mounting in order to
protect the underside of the circuit board.
Figure 2.7.1 AIM-1/2SL Mounting Holes.
Location of mounting holes for the AIM-1/2SL is shown in
scale. Note that the drawing will not print the exact size of the actual circuit board.
To Next Page
Loading...