Open the box using the box cutter and fold
open the top. Inside you should see protective
styrofoam along with the following contents:
• Apollo City electric scooter
• Manual
• Charger and cable
• Hex key
• Screw Kit
If any of these items are missing, please contact
us immediately via apolloscooters.co/support.
With the help of someone, remove the scooter
from the box and place it on a flat surface.
We recommend using a stool or bench as the
wheels need to be able to spin freely.
Carefully remove the protective material from
the scooter and set it aside. We suggest keeping
both the styrofoam and the box in case you
need to ship your scooter back to us. Otherwise
recycle the materials wherever possible.
4 5
UNBOXING
Intro Unbox your scooter
Setting up your scooter right is the single most
important step to your safety.
Please note that this process is also available
in video format through our help centre. Visit
apolloscooters.co/support to view it.
We recommend having the following items
ready prior to starting the setup process:
• Box cutters or knife
• Stool or bench
• Air pump
• Someone to help
Improper assembly of your Apollo scooter
can cause component or performance
failure resulting in loss of control, serious
injury, or death. In the event of a
malfunction or any damage to any of the
components during set up of your scooter,
please discontinue set up immediately, do
not ride the scooter, and contact our
support team through our help desk
apolloscooters.co/support. If you are not
sure you have the experience, skills, and
tools to correctly perform all assembly
steps in the manual and the assembly
video at apolloscooters.co/support,
consult our support team or a local electric
scooter shop.
To Next Page
Loading...
