Apollo PHANTOM V3 User Manual

27
Maintenance Table
5km / every ride 50km 500km 1000km
Tires
Lights
Brakes
B attery
Wheel nut
Motor bolt
Suspension
Fender screws
Headset screws
Main direction bolt
Locking mechanism
Direction / bearings
Handlebar components
X
X
X
X
Check tire pressure
Ensure that the brakes are functional
Ensure that all the lights work properly
Ensure that the locking mechanism
is tight
X
X
X
Re-tension the locking mechanism
X
X
Grease the suspension pin
Review Battery health (V3 only)
Refer to the app
X
X
X
X
X
X
X
X
X
X
Change tire
Change brake pads
Change the main direction bolt once a
year or 1000km
(whichever comes first)
X
Ensure no looseness in the steering
system
Ensure that all the handlebar
components are properly tightened
X
X
Ensure that brakes are properly
adjusted
Lubricate brake cables (Mechanical
brakes)
Ensure that the front and rear
suspension are properly tighted
Ensure that the wheel nuts are
properly tightened
X
X
Ensure that the headset is properly
fastened
X
X
Ensure that the fender screws are not
coming loose
Ensure that the main direction bolt is
at the correct torque (40Nm – 50Nm)
Ensure that the motor bolts are
properly tightened
X
X
X
Perform a full inspection of the
suspension. Change the suspension at
the slightest sign of wear.
X
X

Apollo PHANTOM V3 Specifications

General

Brakes	Hydraulic disc brakes
Water Resistance	IP54
Tires	10-inch pneumatic
Lights	Front and rear LED lights
Max Load	120 kg
Weight	77 lbs (35 kg)