Unfold the stem by pulling it to a
vertical position. Ensure you do
so until the stem is completely vertical.
4
1 2
5
3
6
6
Unfolding
Prepare for Assembly
Always follow the below instructions when unfolding your scooter and prior to each ride. Failure to
ensure the safety button of the folding mechanism is clipped into the scooter stem and to ensure the
stem is fully secured before your ride may lead to the stem coming undone during your ride, which
can result in loss of control, serious injuries and death. Do not operate the scooter if you notice
anything wrong with the scooter stem, the safety button, or the locking mechanism.
The first step is to unfold your
Apollo Phantom V3. To do so,
ensure the hook is not clipped into the
rear foot rest. If it is, push down on the
sistem and unhook it from the rear foot
rest.
Locate the safety pin inserted
into the folding mechanism and
gently remove it. This will allow the
stem of the scooter to be lifted in the
following step.
Place the safety pin back in the
designated location, ensuring it
is pushed all the way in. This acts as an
additional safety mechanism, keeping
the stem locked in place.
Fold the latch all the way up.
Next, make sure you turn the ring
to secure the latch in place. This
will prevent that latch from unfolding.
1
2
3
4
5
6
1
4 5 6
2 3
WARNING
To Next Page
Loading...
Need help?
General
