Apollo Twin Hardware Manual Chapter 3: Controls & Connectors 25
(19) Optical In
This is a TOSLINK input for connection to other gear with an optical ADAT or S/PDIF
output. The protocol to be used (ADAT or S/PDIF) is specified in the Interface panel of
the Console Settings window.
(20) Thunderbolt Port
Connect the Thunderbolt cable (not included) here. A Thunderbolt connection to the host
computer is required to use all Apollo Twin features and UAD Powered Plug-Ins.
Side Panel
Kensington Security Slot (not shown)
The anti-theft security slot on the side panel connects to any standard Kensington lock.
To Next Page
Loading...