APOLLO3D SATURN 10Plus - 4. Introduction of Touch Screen

11
4.Introduction of Touch Screen-Saturn10
Main
Info screen: the information of your printing.
Prepare: Move axis, Auto home, Set home
offsets, Disable steppers, Preheat PLA,
Preheat ABS.
Control: Temperature, Motion, Filament,
Restore failsafe,
Print from SC:
Prepare-1
Main: back to homepage.
Move axis: Increase/ Reduce the distance
from the x-axis/y-axis/z-axis to the origin.
Auto home: x-axis/y-axis/z-axis to the origin.
Prepare-2
Preheat PLA: the PLA filament you upload or
download.
Preheat ABS: the PLA filament you upload or
download.
Prepare PLA
Preheat PLA: Control the temperature both of
extruder and hotbed.
Preheat PLA End: Control the temperature of
extruder.
Preheat PLA: Control the temperature of
hotbed.