APOLLO3D SATURN 10Plus - Accessories; Product Parameters; Terms

5
1.1 Accessories
Filament
Needle for Nozzle
1.2 Product Parameters
Name
Saturn 10/10 plus
Print Technology
Fused Deposition Modeling (FFF)
Build Volume
190 x 190 x 150mm
Layer Thickness
0.05mm~0.4mm
Nozzle Diameter
Standard 0.4mm, can be in 0.2, 0.3, 0.5mm
Model Materials
1.75mmPLA, ABS, carbon fiber, etc
Product SIZE & WEIGHT
370 x 380 x 388mm/8.5kg
Package SIZE & WEIGHT
445 x 435 x 460mm/8.9kg
Power Requirements
100-240V, 50-60Hz
Connectivity
USB Stick by Saturn 10 / SD card by Saturn 10 plus
Print File Type
Gcode
1.3 Terms
Build Volume
The three dimensional amount of space that an object will use once
it is completed.
Extruder
The device that draws the filament from the spool, melts it and
pushes it through a nozzle into the build plate.
Leveling Nuts
Nuts under the build platform that are used for adjusting the distance
between the nozzle and build plate.
Extruder
The device that draws the filament from the spool, melts it and
pushes it through a nozzle into the build plate.