Why does my Aposen Vacuum Cleaner suction get weak?
If the suction of your Aposen Vacuum Cleaner becomes weak, it could be due to a full dust cup. Emptying the dust cup should resolve this. Another possible cause is a dirty HEPA filter, so try cleaning the HEPA filter. Also, make sure the dust cup is installed correctly.
What to do if my Aposen A16 battery can not get charged on the charger holder?
If the battery of your Aposen Vacuum Cleaner isn't charging on the charger holder, first ensure that the charger and charging base are correctly connected to the appliance. If the indicator light is not on during charging, please contact the seller for help.
Store indoors in a dry place and out of the reach of children. Always use responsibly.
Use manufacturer-supplied chargers. Check voltage and cord condition. Never carry by cord.
Assemble the battery pack into the dust cup, ensure the battery bolt head is inserted rightly.
Insert the accessory (sofa brush or 2 in 1 brush) to the body as shown.
Charge the appliance on the charger holder when the indicator light is blinking blue.
Remove battery, disassemble dust cup, wash HEPA filter with clear water and dry it.
General| Brand | Aposen |
|---|---|
| Model | A16 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
