Why is my Aposen ST600 not picking up dust?
If your Aposen Vacuum Cleaner isn't picking up dust or the suction is weak, first, empty the dust cup. Then, remove the dust filter and check the air duct for any obstructions, removing them if present. Clean or replace the HEPA filter. Finally, make sure the appliance is fully charged.
What to do if dust escapes from my Aposen ST600 Vacuum Cleaner?
If dust is escaping from the suction hole of your Aposen Vacuum Cleaner, the dust cup might be full; empty it. Also, the dust cup filter may not be installed correctly; review the installation instructions. If there's a puncture or hole in the dust cup filter, replace it.
Guide on how to connect the extension tube to the main vacuum body.
Instructions for connecting the floor brush assembly to the main body.
Details on how to attach and use the crevice tool for cleaning.
Steps to use the vacuum cleaner in its upright configuration.
Instructions for detaching the extension tube and using the unit handheld.
General| Model | ST600 |
|---|---|
| Type | Cordless Stick Vacuum Cleaner |
| Charging Time | 4-5 hours |
| Battery Capacity | 2200mAh |
| Filtration System | HEPA |
| Cord Length | Cordless |
To Next Page
