103N / 105N / 106
EN
WARNING
1-1 Unpacking and Inspection
1-2 Meter Safety
INTRODUCTION
THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED PERSONNEL ONLY.
TO AVOID ELECTRIC SHOCK, DO NOT PERFORM ANY
SERVICING OTHER THAN THAT
CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.
Upon removing your new Digital Multimeter from its packing,
you should have the following items:
1. Digital Multimeter.
2. Test lead set (one black, one red).
3. Instruction manual.
4. Protective holster.
5. K Type Temperature Sensor. (106 only)
6. Sensor Adaptor. (106 only)
Terms as Marked on Equipment.
Symbols in this Manual.
ATTENTION — Refer to manual.
DOUBLE INSULATION — Protection Class II.
DANGER — Risk of electric shock
This symbol indicates where cautionary or other
information is found in the manual.
FUSE
Battery
To Next Page
Loading...
