11
Placing Stratus 3 in Aircraft
Do not turn on Stratus 3 until it has been mounted so that it can
calibrate correctly.
Using the dash mount
1� Place the dash mount on the aircraft dash�
2� Place Stratus 3 in the dash mount so that the arrow on
the bottom of the receiver points in the direction of ight.
The front of the receiver should be as close to the pilot as
possible so that it can draw air from the cabin�
Using a window mount
1� Install the mount on a window inside the aircraft�
2� Orient Stratus 3 so that the arrow on the bottom of the
receiver points in the direction of ight. Lean Stratus 3
against the longer arm of the mount’s cradle�
If the receiver is facing the wrong direction, AHRS data
will be incorrect and the chance of overheating will be
signicantly increased.
3� Press on the top of the receiver until it snaps into place in the
cradle, as shown in the gure on the following page.
ForeFlight
PN: 153510-000008
Contains FCC ID: YOPGS2100MIP
This system incorporates elements of the UBR technology developed
by the Mitre Corporation on behalf of the U.S. Government
Direction of Flight
SSID: [Your Wi-Fi network name here]
To Next Page