Appareo Stratus 3 - Connecting to Stratus 3; Wi-Fi Network Connection; Open ADS-B Mode; Confirming Connection

18
Connecting to Stratus 3
Your tablet or phone must be connected to the Stratus Wi-Fi network
(not Bluetooth) for the receiver to communicate with the app� Multiple
devices in the cockpit may be connected to the receiver at the same time�
Receiver Wi-Fi network security can be congured in ForeFlight Mobile.
NOTE: The Stratus Wi-Fi network provides a wireless connection between
the receiver and ight apps. It does not provide an internet connection.
1� Tap the Settings icon on your tablet or phone’s home screen�
2� Tap Wi-Fi�
3� Make sure that Wi-Fi is enabled. Tap the Stratus wireless network,
displayed under Choose a Network, to connect� Your Wi-Fi
network name is on the label on the back of your receiver�
When your tablet or phone is connected to the Stratus wireless
network, a checkmark will appear next to the network name.
4� If you’re ying with an app other than ForeFlight Mobile or
Stratus Horizon Pro, enable Open ADS-B mode in Stratus
Horizon Pro.
5� Conrm that the receiver is connected. Navigate to the settings
page of Stratus Horizon Pro or the Stratus Status page of
ForeFlight Mobile� See page 19 for more information on
adjusting receiver settings�