3
Quick Start Instructions
1� Charge Stratus 3 to 100% battery using the wall charger�
2� Place dash mount in aircraft�
3� Place unpowered receiver in mount�
4� Turn on Stratus 3 by pressing the power button�
5� Connect your tablet or phone to the Stratus Wi-Fi network from the
Settings
menu�
6� If you’re ying with an app other than ForeFlight Mobile or Stratus
Horizon Pro, enable Open ADS-B mode in Stratus Horizon Pro.
7� Open a compatible ight app and conrm connection to receiver.
NOTE: Because ADS-B signals are broadcast by ground stations,
Stratus 3 will not receive weather and trafc information while it is on
the ground
�
Shipping Contents
• Stratus 3 portable receiver
• Dash mount
• Wall charger and charging cable
• Stratus 3 Pilot’s Guide
To Next Page
Loading...