Apple IIe - Page 150

150 Apple lie Users Handbook
• Applesoft
RUN
• Integer
RUN is used to execute the BASIC program currently stored in
memory . Prior to program execution, all variables, pointers, and
stacks
will be cleared.
Configuration
RUN
[/inenumber]
If /inenumber is specified, execution will begin at the specified
line.
If no linenumber is specified, execution will begin with the
lowest line number. If a non-existent linenumber is specified,
one of the following error messages will result:
***BAD BRANCH ERR Integer
?UNDEF'D STATEMENT ERROR Applesoft
In Integer BASIC, RUN can only be executed in the immediate
mode .
•
Applesoft
SAVE
• Integer
The SAVE command is used to store a program on diskette or
cassette.
Cassette
Diskette
Configuration
SAVE
SAVE
filename [Dx] [,Vx] [,Sx]
When using the cassette SAVE, the cassette recorder's Play and
Record keys must be depressed
when SA VE is executed .
The
lie will beep when it begins to save the program and will