Apple IIe - Page 151

Apple BASIC Reference Guide 151
beep a second time when the recording has been completed . At
this
time, the operator should stop the cassette recorder.
SAVE is only interpreted as 'a BASIC reserved word when used
with the cassette unit.
In the DOS SAVE, SAVE need only be entered with the program's
filename and the return key pressed. If the indicated filename
duplicates that of a file in the same language already on the
diskette, the contents of the original program will be erased and
replaced with the new program. If the indicated filename
duplicates that of a file in a different language or with a different
file type, the following message will be displayed:
FILE TYPE MISMATCH
Example
SAVE
SCALE=
• Applesoft
o Integer
SCALE= is used to set the size of shapes drawn by ORA W or
XDRAW in high resolution graphics.
Configuration
SCALE=x
The integer value of xis multiplied by the size of the shape table.
Therefore, when SCALE=1, a shape is drawn with the same scale
as that with which it was defined. SCALE=2 causes the shape to be
drawn at twice its defined size, etc. SCALE=O causes the shape to
be drawn at 256 times its defined size.