iMac (Flat Panel)
Memory, SO-DIMM
Installation Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note:
Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Tools Required
The only tool required for this procedure is a Phillips screwdriver.
Opening the Computer
Warning: Always shut down your computer before opening it to avoid damaging its
internal components or causing injury.
1. Unplug all cables from the computer except the power cord.
2. Supporting the neck and the base, lay the computer down on a soft cloth as shown in
Figure 1.
Figure 1
To Next Page
