98 Appendix C Connecting to the Internet
Manual Configuration
Have your static IP address, router address, and subnet mask from your ISP ready.
To set up a manual configuration:
1 In Network preferences, choose Built-in Ethernet from the Show pop-up menu.
2 Click TCP/IP, if necessary.
3 Choose Manually from the Configure IPv4 pop-up menu.
4 Type the other information into the corresponding fields.
5 Click Apply Now.
Once you configure your network, your connection is ready. Open your web browser
(or another TCP/IP application) to test your Internet connection.
LL3218Q87.book Page 98 Wednesday, March 16, 2005 6:28 PM
To Next Page
Loading...
