Need help?Do you have a question about the APRILIA SHIVER 900 and is the answer not in the manual?
General| Displacement | 896.1 cc |
|---|---|
| Transmission | 6-speed |
| Rear Brakes | 240 mm disc, single-piston caliper |
| Engine Type | V-Twin, 4-stroke |
| Power | 70 kW (95.2 hp) @ 8, 750 rpm |
| Torque | 90 Nm at 6, 500 rpm |
| Fuel System | Electronic fuel injection |
| Front Suspension | Inverted fork with adjustable preload and rebound damping |
| Rear Suspension | Aluminum swingarm with adjustable rebound and preload |
| Front Brakes | Dual 320 mm discs, radial 4-piston calipers |
| ABS | Standard |
| Traction Control | Adjustable traction control |
| Ride Modes | Sport, Touring, Rain |
| Seat Height | 810 mm |
| Wheelbase | 1, 460 mm |
| Fuel Capacity | 15 liters |
| Dry Weight | 199 kg (439 lbs) |
Detailed specifications of the engine, including model, type, capacity, and bore/stroke.
Specifications for front and rear brake systems, including disc and caliper details.
Crucial torque values for various fasteners during assembly and maintenance.
Intervals and tasks for scheduled maintenance based on mileage and time.
Procedures for checking and replacing engine oil.
Procedures for checking and adjusting valve clearance.
Details on front electrical components, torque values, and wiring.
Details on rear electrical components, torque values, and wiring.
Comprehensive schematic of the motorcycle's electrical system.
Throttle body function and operation, including self-learning procedures.
Step-by-step procedure for removing the engine from the motorcycle.
Diagram and key for the gearbox components.
Diagram and key for the gearbox shafts and gears.
Diagram and torque specifications for the clutch cover components.
Step-by-step disassembly of the clutch assembly.
Procedures related to the cylinder head and timing system.
Procedures for removing the cylinder head.
Procedures for setting engine timing using specific tools.
Procedures for removing the cylinder and disassembling the piston.
Procedures for removing the throttle body.
Procedures related to the front suspension system.
Procedures for removing and adjusting the front fork.
Procedures for filling fork oil, including quantities and levels.
Specifications and torque values for shock absorber mounting.
Procedures for adjusting rear shock absorber settings.
Procedures related to front and rear wheel removal and checking.
Procedures for removing and checking the front wheel.
Procedures for removing the rear wheel and its components.
Details on the ABS braking system components and mounting.
Explanation of how the ABS system operates.
Description of the ABS system's operational phases.
Procedures for removing and installing front brake pads.
Procedures for bleeding the hydraulic braking system.
Procedures for replacing coolant, including draining and refilling.
Diagram and torque values for water pump components.
Procedures for removing the entire water pump assembly.
Procedures for removing the fuel tank and related components.
Pre-delivery inspection checklist covering aesthetics, torques, and electrical systems.
Checks for the main switch, lights, horn, starter, and helmet compartment switch.
Checks performed during a road test, including cold start and instrument panel operation.
To Next Page