APRILIA SHIVER 900 User Manual

•
Position a central stand in order to sup-
port the engine and a trestle under the
rear of the motorcycle in order to raise
it.
•
Lower the engine partially, unscrew the
screws (13) used to fasten the earth
cables to the engine, and remove
them.
•
Lower the engine completely, and
raise the rear of the motorcycle so that
it is possible to remove the engine
completely.
Installing the engine to the vehicle
NOTE
IN ORDER TO INSTALL THE ENGINE ON THE VEHICLE, REPEAT THE "REMOVING THE ENGINE
FROM THE VEHICLE" PROCEDURE IN REVERSE ORDER, AND CARRY OUT THE "PREPARING
THE VEHICLE" PROCEDURE.
See also
Removing the engine from the vehicle
Vehicle preparation
SHIVER 900 Engine from vehicle
ENG VE - 205

APRILIA SHIVER 900 Specifications

General

Displacement	896.1 cc
Transmission	6-speed
Rear Brakes	240 mm disc, single-piston caliper
Engine Type	V-Twin, 4-stroke
Power	70 kW (95.2 hp) @ 8, 750 rpm
Torque	90 Nm at 6, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Inverted fork with adjustable preload and rebound damping
Rear Suspension	Aluminum swingarm with adjustable rebound and preload
Front Brakes	Dual 320 mm discs, radial 4-piston calipers
ABS	Standard
Traction Control	Adjustable traction control
Ride Modes	Sport, Touring, Rain
Seat Height	810 mm
Wheelbase	1, 460 mm
Fuel Capacity	15 liters
Dry Weight	199 kg (439 lbs)