APRILIA SHIVER 900 User Manual

Exhaust valve clearance
0.15 - 0.20 mm (0.0059 - 0.0078 in)
If the valve clearance is out of tolerance, carry
out the adjustment procedure, as follows:
•
Position the front cylinder at TDC.
•
Remove the cam tower by unscrewing
and removing the 8 fastening screws in
the order indicated on the cam tower
itself.
•
Secure the cam shafts in position using
the dedicated timing pins.
Specific tooling
020719Y Timing pin
•
Remove one cam shaft at a time
•
leave the other camshaft in position
and secured by the timing pin.
CAUTION
IF BOTH CAMSHAFTS ARE REMOVED AT THE SAME
TIME, THE ENGINE COULD ROTATE, RENDERING IT NEC-
ESSARY TO RETIME IT.
SHIVER 900 Maintenance
MAIN - 73

APRILIA SHIVER 900 Specifications

General

Displacement	896.1 cc
Transmission	6-speed
Rear Brakes	240 mm disc, single-piston caliper
Engine Type	V-Twin, 4-stroke
Power	70 kW (95.2 hp) @ 8, 750 rpm
Torque	90 Nm at 6, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Inverted fork with adjustable preload and rebound damping
Rear Suspension	Aluminum swingarm with adjustable rebound and preload
Front Brakes	Dual 320 mm discs, radial 4-piston calipers
ABS	Standard
Traction Control	Adjustable traction control
Ride Modes	Sport, Touring, Rain
Seat Height	810 mm
Wheelbase	1, 460 mm
Fuel Capacity	15 liters
Dry Weight	199 kg (439 lbs)