APRVTIO ALD-200 User Manual

Notices
ALD-200 REFRIGERANT
LEAK DETECTOR
GAS/RSET
H
2
CO
2
HC R1234YF
PEAK
SEN: L
WARM UP
PEAK
MUTESENS
ON/OFF
- Do not submerge the product in water or allow water to enter the
intake of the probe.
- Do not expose the product to temperatures exceeding 60°C.
- Do not leave the product in direct sunlight for long periods of time.
- Do not dismantle or attempt repairs of the product without authorisation.
- Do not change or replace the included lithium battery.
- Do not leave for more than 6 months without charging the battery to
prevent damage.
- Do not use on objects with a charge or appliances connected to a power
source.
- Ensure the filter is present and clean before performing a test.
- Ensure there is enough power before performing a test.
- Use only the supplied charging cable.
- Avoid the inhalation of refrigerant vapor. High concentrations are harmful
and may lead to coma or death.
sales@aprvtiotech.comhttps://aprvtiotech.com/ +1 713 701 1986 sales@aprvtiotech.comhttps://aprvtiotech.com/ +1 713 701 1986
Technical Specifications
Video Instruction

APRVTIO ALD-200 Specifications

General

Brand	APRVTIO
Model	ALD-200
Category	Security Sensors
Language	English

Summary

Notices

Important Safety and Usage Precautions

Essential guidelines to prevent damage, injury, and ensure proper operation.

Structure

Device Components

Identification and description of the ALD-200's physical parts and features.

Setup

Initial Setup Procedure

Steps for powering on, checking battery, and adjusting sensitivity before testing.

Key Operation

Button Functions and Operation

Explanation of how to use each button for device control and features.

Specifications

Technical Specifications Details

Detailed technical parameters including sensor, battery, performance, and certifications.