To Next PageTo Next Page
Need help?Do you have a question about the APRVTIO WJL-6000 PRO and is the answer not in the manual?
General| Brand | APRVTIO |
|---|---|
| Model | WJL-6000 PRO |
| Category | Security Sensors |
| Language | English |
Instructions for turning the device on, indicating normal function with a continuous beep.
Guidance on using +/- buttons to adjust sensitivity across 5 levels.
Instructions to use the 'reset' button for calibration and continued leak detection.
Lists the key parts of the leak detector: sensing tip, probe, buzzer, display, buttons, and compartment.
Procedure to open and take out the battery rack from the device.
Instruction to install four AAA alkaline batteries into the rack.
Guidance on returning the battery rack to its position in the device.
How to turn the device on by pressing the power button.
Confirmation of successful sensitivity setup indicated by a flashing digital number.
How the device indicates a detected leak via digital display and audible siren.
Details on operating temperature, maximum sensitivity, response time, and probe length.
Information on battery life, work mode, dimensions, warm-up time, and power supply.
Explanation for continuous beeping indicating normal operation, distinct from rapid leak detection beeps.
Troubleshooting steps for when the detector does not detect a leak.
Meaning of the '6' display when battery voltage is low.
Meaning of the 'E' display indicating a wet sensor needing attention.
Methods to prevent false alarms by using automatic circuit or moving to open-air environment.
Troubleshooting for persistent siren sounds, possibly due to high humidity, requiring a reset.
Warnings against submerging in water or exposing to high temperatures/direct sunlight.
Instructions on keeping the sensing tip clean and proper cleaning methods with solvents.
Advice against dismantling the product and caution for electric shock when replacing parts.
