4
2022/01/06
Rev1.4 Quick Installation Guide
NOTE: Each channel connects 2 PV modules in series (For PV modules with Voc<60V).
The input channel will not work if connects to a single module (Voc<60V).
That means the quantity of PV modules in the system is an even number.
Step 8. Complete the APsystems installation map
a. Each APsystems Microinverter has 2 removable serial number labels.
b. Complete installation map by sticking ID label of each microinverter at the right location.
c. The second serial number label, could be stuck on the solar module frame, which could help later to confirm the position
of the microinverter without dismantling the PV module.
.
The layout of the microinverters' serial numbers installation map is only suitable for typical
installation.
. Installation Map is available in the last page appendix of this manual.
. Use ECU_APP (available in the EMA Manager) to scan the serial numbers on the map when
setting up the ECU (see ECU instruction manual for more info).
Product information is subject to change without notice. (Please download manuals at www.APsystems.com).
To Previous Page
Loading...
