To Next PageTo Next Page
Need help?Do you have a question about the APsystems DS3-S and is the answer not in the manual?
General| Number of MPPTs | 2 |
|---|---|
| Max DC Input Voltage | 60V |
| Frequency | 50/60Hz |
| Product Type | Microinverter |
| Nominal Output Voltage | 230V |
| Power Factor | >0.99 |
| Total Harmonic Distortion (THD) | <3% |
| Enclosure Rating | IP67 |
| Operating Temperature Range | -40°C to +65°C |
| Cooling | Natural Convection |
| Operating Voltage Range | 16V-60V |
| AC Output Voltage | 220-240V |
Core safety precautions for qualified professionals, installation, and general handling.
Addresses EMC compliance and provides steps to mitigate radio interference.
Explains key safety symbols and terms used in the manual and on the equipment.
Highlights low DC voltage safety, comparing it to string inverters.
Explains individual MPPT per module for optimal energy harvest under varying conditions.
Discusses system reliability, high-temperature operation, and installation versatility.
Describes the ECU and EMA for system performance monitoring and analysis.
Summarizes main features like dual MPPT, 600VA output, IP67 rating, and Zigbee communication.
Lists supplied and required accessories for proper installation.
Detailed step-by-step guide for mounting microinverters and connecting AC/DC cables.
Important warnings and labels for electrical isolation and safety during installation.
Instructions on powering up the system via circuit breakers and accessing performance data.
Explains LED indicators and error codes for diagnosing microinverter issues.
Utilizes ECU_APP and EMA for on-site and remote diagnostics and troubleshooting.
Guidance on contacting technical support and information on maintenance requirements.
Step-by-step guide for safely removing and installing a replacement microinverter.
Detailed technical specifications, electrical data, and compliance information for the DS3-S model.
Illustrates the typical single-phase wiring configuration for the DS3-S microinverter system.
